가와사키 K7V280DTP1N4R-0E02-V 메인 유압 펌프 – SANY 650 굴삭기용 순정 신품

설명

제품 소개 영상

세부 정보

1. 주요 기능 및 이점

• Genuine Kawasaki K7V series main hydraulic pump – Model K7V280DTP1N4R-0E02-V. Manufactured by Kawasaki Precision Machinery (KPM), a world leader in hydraulic components for heavy equipment. This is a brand‑new, factory‑fresh unit – not remanufactured, not rebuilt. The “280” in the model designation indicates a displacement of 280 cm³/rev, the largest in the K7V lineup.

• SANY‑customized heavy‑duty hydraulic platform – This pump is SANY’s specially customized K7V280 large‑displacement main pump, precisely matched to the SY650H’s all‑electric hydraulic control system. It delivers optimal flow matching – “what you need, when you need it” – with heavy‑load power‑increase control that boosts output as main pressure rises, dramatically improving heavy‑duty operation efficiency and sustained digging power.

• Massive flow for 65‑ton class mining excavators – Rated pressure of 35 MPa (peak 40 MPa). The SANY SY650H is equipped with an Isuzu 6WG1X engine delivering 345 kW (approximately 462 HP), paired with the K7V280 large‑displacement main pump for optimal performance. Maximum flow reaches approximately 462 × 2 L/min – the hydraulic power needed for fast cycle times, high bucket fill factors, and sustained production in the most demanding mining applications.

• World‑class efficiency and low noise – The K7V series achieves pump efficiency improved by 1.5 percentage points and noise reduced by 3 dB(A) compared to its widely popular predecessor, the K3V series. This makes it one of the world’s top environmental performers on both counts. Used widely in construction machinery, particularly hydraulic excavators, the K7V series meets market requirements for high efficiency, low noise, compact size and high reliability.

• Enhanced durability for mining conditions – Longer service life is achieved through use of a thicker shaft and large‑capacity bearings, which reduce the load on bearing roller edges. Complete review of dimensional data resulted in shorter total length. The pump also features reduced leakage from sliding parts and lower torque loss, along with suppressed surge pressure and higher casing rigidity for lower vibration.

• Advanced control for precise machine response – The K7V series supports multiple control options including electric flow control, hydraulic pilot flow control, and horsepower control. The SANY‑customized version features all‑electric hydraulic control and heavy‑load power‑increase control, providing precise, predictable machine response – critical for precision grading, trenching, and fine attachment control in mining environments.

• 직접 볼트 체결 교체 – Mounting flange, drive shaft spline, and hydraulic port configurations match the original Kawasaki K7V280DTP specifications exactly. No modifications, no adapters – your mechanic unbolts the old pump and bolts this one in.

• 선적 전 육안 확인 – 포장 전에 실제 제품의 상세한 고해상도 사진(장착 플랜지, 스플라인, 포트 나사산, 주조 부품, 전반적인 상태 등)을 보내드립니다. 고객님께서 발송을 승인하신 후에만 발송하며, 승인 없이 무작정 발송하는 일은 절대 없습니다.

• 빠른 배송 – 1–3 working days lead time from our Guangzhou warehouse. Monthly supply capacity of 300 units, available for single‑piece or bulk orders.

2. 애플리케이션

The genuine Kawasaki K7V280DTP1N4R-0E02-V main hydraulic pump is the power source for SANY SY650H and 65‑ton class excavators used in the most demanding heavy industries:

• 대규모 노천 광업 – The SY650H is SANY’s “super mining excavator” in the 60‑ton class, specifically designed for heavy‑duty mining applications. The K7V280 large‑displacement main pump delivers the massive flow (462 × 2 L/min) and high pressure (35 MPa) needed for loading 100+ ton haul trucks in 20+ hour shifts. The heavy‑load power‑increase control ensures sustained digging power and high productivity, even in the toughest overburden and ore extraction conditions.

• 채석 및 골재 – Loading trucks, stockpile management, and material handling in granite, limestone, and basalt quarries. The pump’s contamination‑resistant design and robust construction withstand abrasive dust conditions, while the all‑electric hydraulic control provides smooth, responsive operation for precise bucket control.

• 중건설 및 인프라 – Dam building, highway cuts, tunnel portals, bridge footings, and large‑scale earthmoving projects. The pump’s ability to maintain consistent flow under varying loads ensures the excavator performs reliably throughout long shifts in exposed conditions.

• 철거 및 스크랩 처리 – Shock loads, vibration, and sharp debris are routine in demolition yards and metal recycling facilities. The Kawasaki K7V280 pump’s robust construction and heavy‑duty bearings absorb these extreme conditions without premature wear.

• 장비 렌탈 차량 유지보수 – 65‑ton excavators are high‑value rental assets. A genuine new pump provides predictable service life and eliminates the gamble of remanufactured or used units – avoiding costly mid‑rental failures, towing bills, and customer complaints.

• Energy & power generation projects – Pipeline construction, power plant earthmoving, and wind farm access road development. The pump’s high efficiency and low noise operation are advantageous in environmentally sensitive or noise‑restricted areas.

3. FAQ - 자주 묻는 질문

Q1: Is this pump an exact replacement for my SANY SY650H?
A: Yes. The K7V280DTP1N4R-0E02-V is the genuine Kawasaki KPM main hydraulic pump customized for the SANY SY650H. SANY uses this specially customized K7V280 large‑displacement main pump combined with an all‑electric hydraulic control system. To confirm compatibility for your specific machine variant, send us your machine serial number and a photo of the old pump nameplate – we will verify within 2 hours.

Q2: 이 펌프는 신품인가요, 재제조 제품인가요?
A: 완전 신품 / 정품 오리지널, not remanufactured. All internal components are new. The pump is manufactured by Kawasaki Precision Machinery (KPM) to original specifications and meets all OEM performance standards. KPM is one of the world’s leading suppliers of hydraulic pumps and motors for excavators.

Q3: What is the difference between the K7V280 and the K3V series?
A: The K7V series is the successor to the widely popular K3V series. The K7V’s pump efficiency is improved by 1.5 percentage points and its noise level reduced by 3 dB(A) compared with the K3V series, making it one of the world’s top environmental performers on both counts. The K7V280 also features a thicker shaft and large‑capacity bearings for longer service life.

Q4: What is the warranty on this pump?
A: 보증 기간은 제품 사양에 따라 6개월에서 12개월입니다. 당사는 정품 오리지널 부품에 대해 보증 서비스를 제공하지 않습니다. 당사의 가치는 처음부터 명확히 드러납니다: 정품 가와사키 KPM 부품, 신품과 다름없는 펌프, 그리고 출하 전 육안 점검이 제공됩니다. 보증 적용이 필요한 고객님께는 애프터마켓 대체품에 대한 견적을 제공해 드릴 수 있으니, 영업팀에 문의해 주시기 바랍니다.

Q5: 배송 기간은 얼마나 걸립니까?
A: 광저우 물류센터에서 주문 확인 후 1~3 영업일 이내에 배송됩니다. 긴급 주문의 경우 특급 배송(DHL/FedEx/UPS)을 이용하실 수 있습니다.

Q6: 어떤 결제 방법을 수락합니까?
A: T/T(전신환), XTransfer, 웨스턴 유니온을 통해 결제하실 수 있습니다.

Q7: How can I verify the pump is genuine before shipping?
Q6: 선적 전에 펌프가 준비되었는지 어떻게 확인할 수 있나요?.

Q8: 이 펌프에는 어떤 오일을 사용해야 합니까?
A: Use a mineral oil‑based anti‑wear hydraulic fluid as recommended by Kawasaki. Proper hydraulic fluid contamination control is essential to prevent premature wear and extend the pump’s working life. Always refer to your SANY SY650H operator’s manual for the correct viscosity and specification.

Critical installation tip for the K7V280DTP1N4R-0E02-V pump:
– 각 펌프의 케이스 드레인 라인 케이스 드레인 라인은 깨끗하고 장애가 없어야 합니다. 막히거나 꼬인 케이스 드레인은 펌프 하우징 내부에 배압을 형성하여 첫 시동 시 즉시 샤프트 씰을 파손시킵니다.
– 새 펌프를 설치하기 전에 전체 유압 시스템을 플러싱하고 모든 필터를 교체하십시오. 고장 난 펌프의 오염 물질은 새 펌프도 기존 펌프와 마찬가지로 빠르게 파괴합니다. 이물질은 가리지 않습니다.
– 재제조 펌프를 설치하기 전에 유압 시스템을 플러싱하고 모든 필터를 교체하십시오. 고장난 펌프의 오염 물질은 신품과 마찬가지로 재제조 제품도 빠르게 손상시킵니다.
– 설치 후, 펌프를 중립 상태로 두고 엔진을 저속 아이들링으로 2-3분간 작동시킨 다음, 각 기능(붐, 암, 버킷, 선회, 주행)을 천천히 작동시켜 시스템 내 공기를 제거하십시오.
– 엔진 플라이휠 하우징과 펌프 정렬을 확인하십시오. 정렬 불량은 베어링의 조기 마모와 샤프트 씰 누수를 유발합니다.

보증 관련 안내: 보증 기간은 제품 사양에 따라 6개월에서 12개월입니다. 당사는 정품 오리지널 부품에 대해 보증 서비스를 제공하지 않습니다. 당사의 가치는 처음부터 명확히 드러납니다: 정품 가와사키 KPM 부품, 신품과 다름없는 펌프, 그리고 출하 전 육안 점검이 제공됩니다. 보증 적용이 필요한 고객님께는 애프터마켓 대체품에 대한 견적을 제공해 드릴 수 있으니, 영업팀에 문의해 주시기 바랍니다.

The K7V280DTP main hydraulic pump is the heart of your SANY SY650H’s hydraulic system. A genuine new Kawasaki KPM pump from 홍텅다 부품 delivers the reliability and performance your 65‑ton mining excavator demands – not with worn components disguised as “rebuilt”, but with factory‑fresh Japanese engineering. Send us your machine serial number – we will confirm compatibility and provide a quote within 24 hours.