日立 ZAX60 液压主泵 – 中国再制造 (AP2D25 / 4663300)

বর্ণনা

বিবরণ তথ্য

১. মূল বৈশিষ্ট্য ও সুবিধা

• Professionally remanufactured to OEM specifications – This AP2D25 series hydraulic main pump (OEM 4663300) has been fully disassembled, cleaned, inspected, and rebuilt in our ISO‑certified facility in China. Worn components (cylinder block, piston assemblies, valve plate, swashplate, bearings, seals) are replaced with new, high‑quality parts. The result is a pump that delivers performance and reliability comparable to a new unit at a fraction of the cost.

• Original Hitachi AP2D25 tandem axial piston design – The AP2D25 is a variable displacement double (tandem) axial piston pump, combining two independent pumping units in one housing. This design powers the travel, swing, boom, arm, and bucket circuits simultaneously, providing smooth, coordinated operation for your ZAX60 (ZX60) excavator.

• Restored hydraulic power – After remanufacturing, this pump delivers rated working pressure up to 24.5 MPa (≈3,550 psi) and intermittent pressure up to 29.4 MPa (≈4,350 psi). Displacement remains 2 × 25 cm³/rev, restoring the original flow and torque characteristics of your machine.

• 集成功率控制（负载敏感）系统 – 再制造泵保留了原厂功率控制系统，该系统可使泵的输出与实际工作负载相匹配。这有助于降低燃油消耗、防止发动机熄火，并延长泵和液压系统的使用寿命。集成的先导齿轮泵也已重新制造，用于为控制回路供油。.

• 直接螺栓固定式替换 – The pump’s mounting flange, drive shaft spline, and hydraulic port configurations are restored to original Hitachi specifications. No modifications, no adapters, no fabrication – your mechanic unbolts the old pump and bolts this one in.

• 高性价比的全新原厂件替代方案 – A new genuine Hitachi main pump can cost thousands of dollars. Our remanufactured AP2D25 gives you the same fit, form, and function at a significantly lower price, without sacrificing reliability. Each pump is tested on a hydraulic test stand before dispatch.

• 发货前视觉确认 – 在包装前，我们会向您发送实际再制造单元的详细高分辨率照片（安装法兰、花键、油口螺纹、整体状况）。您批准后我们才发货 – 我们从不盲目发货。.

• দ্রুত ডেলিভারি – 从我们的广州仓库发货，交货期为 5–8 个工作日。月供应能力为 300 台，可接受单件或批量订购。.

২. আবেদনসমূহ

The remanufactured AP2D25 hydraulic main pump is ideal for Hitachi ZAX60 (ZX60) excavators used in a variety of demanding job sites:

• 城市建设及公用事业 – Sidewalk repairs, water and gas line trenching, fibre‑optic cable installation, and small‑scale demolition. The rebuilt load‑sensing control adjusts flow to match light‑duty cycles, saving fuel while maintaining precise control.

• 住宅景观美化与泳池开挖 – Pool digs, retaining walls, grading, and drainage work. The tandem pump design allows independent flow to travel and attachment circuits, enabling simultaneous boom and bucket movements without power loss.

• 农业与土地管理 – Drainage ditch cleaning, irrigation trenching, pond maintenance, and fence post hole digging. The restored high‑pressure output provides the tractive force needed for pulling through soft, muddy fields.

• 矿山辅助与采石场维护 – Site cleanup, drainage maintenance, equipment pad grading, and light aggregate handling. Abrasive dust and sharp rock fragments place heavy demands on pump seals and wear components; our remanufacturing process replaces all critical wear parts to withstand these harsh conditions.

• 设备租赁车队维护 – Midi excavators are frequent rental items. A failed main pump stops production. A remanufactured pump offers predictable service life (3,000–5,000 hours) at a cost that makes proactive replacement financially sensible, avoiding costly mid‑rental failures and customer complaints.

• 林业与植被清理 – Steep slopes, fallen timber, hidden obstacles. The rebuilt power control system prevents engine stall when sudden load spikes occur, maintaining consistent hydraulic power for attachment operation.

• Road & bridge maintenance – Shoulder repair, guardrail replacement, drainage cleaning, and slope stabilisation. The restored tandem pump allows the operator to reposition the machine while operating the attachment – critical for roadside work with short work windows.

3. Why Choose Hongtengda Parts – Remanufacturing That You Can Trust

At Hongtengda Parts, we have been supplying and remanufacturing hydraulic pumps for excavators since 2001. We know that a main pump failure on your ZAX60 is a production‑stopping event. Our remanufacturing process is not a “clean and reseal” – it is a factory‑grade restoration.

Our 6‑step remanufacturing process:

1. – 单元被拆解为单个部件：轴承保持架、行星架、齿圈、主轴、活塞块、缸筒、配流盘、液压马达部分和制动器组件。 – The pump is stripped down to individual components (cylinder block, piston assemblies, valve plate, swashplate, bearings, shaft, housing).

2. 清洁与裂纹检测 – All parts are cleaned and inspected for cracks or damage. Irreparable castings are scrapped.

3. 磨损部件更换 – The following are always replaced with new: all seals, O‑rings, bearings, and gaskets. The cylinder block and valve plate are re‑ground or replaced. Piston assemblies are matched and replaced as a set. The swashplate surface is reconditioned or replaced.

4. 精密重新组装 – Components are reassembled using OEM torque specifications. Clearance tolerances on the cylinder block / valve plate interface are verified.

5. 液压测试台验证 – The completed pump is mounted to a test stand and run through its full pressure and flow range. We verify operating pressure (up to 24.5 MPa), flow rate (approx. 110‑120 L/min), case drain leakage (must be within spec), and power control response.

6. 最终质量检查与包装 – The pump is painted, fitted with port protection caps, and packed in a heavy‑duty wooden case.

Why our remanufactured pump outperforms cheaper “rebuilt” units:

• New bearings and seals – Many budget rebuilders reuse old bearings. We do not. All rotating components get new bearings.

• 精密研磨的磨损表面 – The cylinder block and valve plate are re‑ground to restore flatness. A lapped surface is essential for low internal leakage.

• Full test report available – Upon request, we provide a test report showing pressure, flow, and case drain measurements.

您未购买的是： A used pump with new paint and a set of O‑rings. Our remanufactured pump is restored to meet or exceed OEM performance standards – at a price that makes sense for your older ZAX60.

• 超过25年的行业经验 – Founded in 2001, we have remanufactured thousands of pumps for Hitachi, Caterpillar, Komatsu, Kobelco, Volvo, SANY, and many other brands.

• 90% স্টকের উপলব্ধতা – AP2D25 series pumps are in stock as remanufactured units, ready for dispatch from our Guangzhou warehouse.

• 24小时内发货 – 从我们广州枢纽到您的货运代理只需 1 天；国际订单在 24 小时内发货。.

• 发货前视觉确认 – We never ship a pump blind. You receive clear photos of the actual unit before packing – you approve, we ship.

• প্রযুক্তিগত সহায়তা – Send us your ZAX60 machine serial number and a photo of the old pump. We confirm compatibility and provide installation guidance within 2 hours.

Send us your Hitachi ZAX60 machine serial number and a photo of the old pump – we will verify fitment, provide a quote, and document our pre‑shipment inspection within 24 hours.