설명
Volvo’s hauler range moved through three engine and emissions generations while keeping the basic hydraulic architecture recognisable, and this pump sits across two of them. That makes it a useful stock item for a mixed fleet and a dangerous one to order on a model badge alone.
적용성 및 근거
Volvo A35E, A35E FS, A35F, A35F FS, A35F/G, A35G, A40E, A40E FS, A40F, A40F FS, A40F/G, A40G and A45G articulated haulers, described in dealer and trade parts data as a main hydraulic pump of axial piston construction. Volvo’s own online catalogue does not return a citable page for the number, so the construction and the machine list are dealer-established rather than manufacturer-confirmed. No displacement, pressure or flow figure is published for it and none is quoted here.
What changes between the E, F and G series
The pump family persists; the control specification does not always. Between these generations Volvo revised engine management, hydraulic pressure settings and the way flow is prioritised between steering, hoist and travel functions. Two pumps can share a housing, a shaft and a port layout while one is set up for a different regulator characteristic. On a hauler that shows up as a body that tips slowly or a machine that steers heavily while digging out of a face, and neither symptom looks like a pump problem at first.
So the order is confirmed from the number cast on your pump plus the machine serial prefix, not from the model letters on the door.
How a hauler main pump announces its decline
- Hoist and tip times lengthen over weeks, worst on hot cycles, while the engine still pulls hard.
- Noise from the pump bay under load: cavitation or a worn control.
- Body drift with the control centred: check the holding valve before condemning the pump.
- Oil at the shaft: case drain back-pressure, frequently introduced during an unrelated repair.
측정 방법은 저희 펌프 구매자 및 사양 가이드, 에 있으며, 재생 범위는 씰 키트 재생 체크리스트.
장착 및 주문
Match shaft spline, pilot, flange, port positions and the control or compensator arrangement against the removed pump. Prime with clean oil before cranking, change the return filter element, clear the suction strainer, keep the case drain unrestricted to tank, and target ISO 4406 18/16/13. Minimum order one piece. Three to six month warranty on new aftermarket units as stated on your proforma invoice; photographed against your order before the wooden case closes, delivery 5 to 8 working days from payment subject to stock. Related listings: 11190766 for the D-series and 11116529 for the hauler fan motor; this section covers 운반차량 유압 펌프.
