Główna pompa hydrauliczna Hitachi ZAX300-5A / 330-3 / 350-3 HPV145 – nowa oryginalna japońska (YB60002458)

Opis

Szczegółowe informacje

1. Kluczowe cechy i korzyści

A hydraulic pump is not a black box. It is the single component that turns engine torque into digging force, swing speed, and travel power. When your HPV145 starts losing efficiency, you feel it in every cycle – slower boom rise, weaker bucket curl, longer travel times, and oil temperatures that creep upward. The question is not whether to replace it, but what you replace it with.

New genuine Japanese HPV145 (YB60002458):

• Zero‑hour history – Every internal component – cylinder block, valve plate, piston assemblies, swashplate, bearings – is factory‑fresh. No wear patterns, no fatigue cracks, no previous contamination.

• Original Hitachi tolerances – The cylinder block and valve plate are precision‑ground to a flatness of 0.002 mm. Internal leakage is minimised, volumetric efficiency is at its peak. This translates directly to faster cycle times, cooler oil, and lower fuel consumption.

• Japanese metallurgy – Cast iron housing, hardened internal components, and seals rated for extreme temperature swings. Built to the same Hitachi construction standards that made the ZAX330‑3 a 10,000‑hour machine.

• Factory‑calibrated power control – The integrated load‑sensing regulator is set to your ZAX series engine and hydraulic system from the factory. It delivers exactly the flow and pressure the job demands – no more, no less. That means no over‑fueling, no wasted heat, no premature wear.

• Direct bolt‑on fitment – Mounting flange, drive shaft spline, port configurations, and bolt patterns match your machine exactly. Your mechanic unbolts the old pump and bolts this one in. No adapters, no shimming, no fabrication.

• Weryfikacja przed wysyłką – We send you clear, high‑resolution photographs of your actual pump before packing: casting numbers, ports, flange, spline. You approve – we ship. Never blind.

• Szybka dostawa – 5–8 dni roboczych z naszego magazynu w Guangzhou. Miesięczna wydajność 300 sztuk.

Czego Państwo nie kupują: A remanufactured pump with new paint over old wear. A “rebuilt” unit that has already lost 10–15% of its original efficiency. A “compatible” pump from an uncertified source. You are buying the same HPV145 that Hitachi puts into new ZAX330‑3 machines – fresh, genuine, and ready to work.

2. Zastosowania

The Hitachi HPV145 main hydraulic pump is the power source for 30–35 ton excavators used in the most demanding job sites worldwide. A genuine new pump delivers consistent, repeatable performance where it matters most:

• Górnictwo odkrywkowe na dużą skalę – 30‑ton excavators load trucks, clean faces, and maintain haul roads in 20+ hour shifts. A pump with low internal leakage holds pressure all day – no power fade as oil heats up, no cycle time creep, no unexpected derates. A reman pump loses efficiency as it warms; a new genuine pump delivers full rated flow from start to finish.

• Heavy civil and infrastructure projects – Highway cuts, dam construction, tunnel portals, bridge footings. Downtime from a failed pump stops an entire project. Site owners impose penalties. A new genuine pump is not a cost – it is insurance against those penalties.

• Quarrying and aggregates – Granite, limestone, and basalt operations subject the hydraulic system to extreme shock loads and abrasive dust. New genuine pumps have new seals, new bearings, and clean internal galleries – they survive where reman pumps fail.

• Rozbiórka i przetwarzanie złomu – Vibration, debris, and sudden impact loads are routine. The HPV145‘s cast iron housing and hardened internal components absorb shocks that would crack inferior castings. A new pump gives you the full service life Hitachi engineered into the design – typically 8,000–10,000 hours.

• Leśnictwo i karczowanie terenu – Remote sites mean no quick parts delivery. A new pump installed before the season gives you thousands of hours of confidence. A reman pump leaves you guessing – and stranded.

• Floty wynajmu sprzętu – Renters do not pay for breakdowns; you do. A machine with a fresh, genuine new pump stays on rent, not in the shop. No “it broke again” calls. No lost revenue. No damage to your reputation.

3. Dostępność magazynowa - Części Hongtengda

Your ZAX330-3 does not care about supply chain excuses. Neither do we. At Hongtengda Parts, we keep the Hitachi HPV145 (YB60002458) in stock at our Guangzhou warehouse – not in a supplier‘s backlog, not on a slow boat from another continent.

Dlaczego dostępność ma znaczenie: A main pump failure stops your machine completely. No boom raise, no swing, no travel. The difference between a 5‑day emergency repair and a 24‑hour pit stop is one phone call – when the part is on our shelf.

• Zdolność dostaw: 300 sztuk miesięcznie – Stable production and deep stock levels for the Japanese‑spec HPV145

• 90% of our catalog in stock – Gotowy do natychmiastowej wysyłki z naszego magazynu w Guangzhou

• Wysyłka w ciągu 24 godzin – Z naszego hubu w Guangzhou do Twojego spedytora w 1 dzień; zamówienia międzynarodowe wysyłane w ciągu 24 godzin

• Profesjonalne opakowanie eksportowe – Heavy‑duty fumigation‑free wooden cases with internal bracing and foam padding for sea or air freight

• Brak ciśnienia MOQ – Wystarczy jedna sztuka, aby złożyć zamówienie

• Sprawdzenie stanu magazynowego w czasie rzeczywistym – Wyślij e-mail lub wiadomość w dowolnym momencie, aby potwierdzić dostępność przed dokonaniem płatności

Po co czekać tygodniami na części? Części Hongtengda - gdzie zapasy spotykają się z pilnością.