11172358 Volvo L60E L90E L110E L120E용 보조 기어 펌프

제품 설명:

부품: 11172358 small bore hydraulic pump, listed at 18 cc by parts suppliers, for the Volvo L60E, L70E, L90E, L110E and L120E wheel loaders and their F and G variants.

Correction: our source record grouped this item with piston pumps for haulers. It is a small loader pump, and the machine list has been corrected here.

공급 형태: 중국 제조 HTD 브랜드 신품 대체품입니다. 최소 주문 수량 1개, 목재 케이스 포장, 발송까지 5~8 영업일이 소요됩니다.

설명

An 18 cc pump looks like an inconsequential part on a machine this size, which is exactly why it gets diagnosed last and replaced first. On the E, F and G series Volvo loaders this item sits in the low-pressure side of the system, and when it fades the symptoms look like something much bigger has failed.

적용성 및 근거

Volvo L60E, L60F, L60G, L60GZ, L70E, L70F, L90E, L90F, L90GZ, L110E, L110F, L120E, L120F, L120G and L120GZ wheel loaders, with parts suppliers giving a displacement of about 18 cc. Volvo’s own online catalogue does not return a citable page for the number, so the size figure and the machine list are supplier-established rather than manufacturer-confirmed. Our incoming parts sheet had this item filed with hauler piston pumps, which is wrong for both the machine class and the construction.

What a small supply pump does when it fades

  • Steering effort increases, particularly at low engine speed, because the priority flow that the small pump supports is no longer adequate.
  • The machine works slowly rather than not at all, which points people at the main pump and the relief settings.
  • Noise appears at the main pump inlet as it begins to starve, and the main pump then wears in the way starvation always causes.
  • Oil heats faster than expected with clean cores, because bypassed flow is doing no useful work.

Test the cheap things first: oil level, suction restriction, filter condition, then measure the small pump’s output before touching the main pump. Our 펌프 구매자 및 사양 가이드 교체품을 원본과 비교하는 방법을 다루며, 구동 기어 검사 입력 측을 다룹니다.

장착

Match shaft form, pilot, flange, port positions and rotation direction against the removed pump. Gear and small supply pumps are direction-sensitive, and a reversed unit starves itself from the first revolution. Prime with clean oil before cranking, change the return filter element, clear the suction strainer, and keep the case drain unrestricted to tank. Target ISO 4406 18/16/13 for the piston components in the same circuit.

주문

Send the number cast on your pump and the machine serial prefix, since Volvo changed loader hydraulic arrangements between series. Minimum order one piece. Three to six month warranty on new aftermarket units as stated on your proforma invoice; photographed against your order before the wooden case closes, delivery 5 to 8 working days from payment subject to stock. This item sits under 유압 기어 펌프 및 굴삭기 유압 펌프, not with the fan drive range.

부품을 찾을 수 없나요? 오늘 배송이 필요하신가요? 지금 문의하세요.

아래에 모델 또는 일련 번호를 입력하면 당일 발송이 가능한 견적을 받을 수 있습니다.