설명
The folder this part came from carried a machine description that does not match the part. 12736393 is not a generator component; dealer and trade parts data place it on the G-series motor graders as the hydraulic fan motor. Correcting that here matters, because a buyer searching for a grader fan motor would never have found it under a generator heading.
적용성 및 근거
Volvo G900, G900B and G900C motor graders, with dealer parts data extending the list to G930B, G940, G946, G970 and G976. Volvo’s own online parts catalogue does not return a citable page for the number, so the machine list is trade and dealer established rather than manufacturer-confirmed. Confirm against the number cast on your motor and the machine serial prefix before ordering.
Why a grader is unusually hard on a fan motor
A motor grader works at low speed with the blade loaded, which means the engine is producing heat while the machine produces almost no ram air through the cooling pack. Add the fine, talc-like dust that grading throws up and the core face seals shut faster than on most equipment. The fan therefore spends its working day at or near maximum command, in hot oil, in the dirtiest air on site.
- Clean the cores on a schedule, not when the temperature alarm appears.
- Confirm the fan accelerates under thermal demand before condemning the motor.
- Measure flow at the motor ports; short supply points at the fan drive pump.
- Check the case drain line for restriction, since casing back-pressure is what finishes shaft seals.
Procedures are in our 유압 팬 모터 진단 가이드, and Volvo’s published loader literature describes the same cooling principle this machine uses: a hydraulically driven fan that regulates component temperature and can be reversed to self-clean the cooling units.
장착 및 주문
Match shaft form, flange, port positions and drain arrangement against the removed motor. Flush the circuit and change the filter element if the old unit produced debris, prime the casing with clean oil before cranking, and target ISO 4406 18/16/13. Minimum order one piece. Three to six month warranty on new aftermarket units as stated on your proforma invoice; bench checked and photographed against your order before the wooden case closes, delivery 5 to 8 working days from payment subject to stock. The range sits under 볼보 유압 팬 모터.
