17487751 Main Hydraulic Pump for Volvo A25G A35G A45G Hauler

제품 설명:

부품: 17487751 main hydraulic pump for the Volvo A25G, A30G, A35G, A40G and A45G articulated haulers, listed in dealer parts data as a hydraulic pump for the G series.

회로: main implement hydraulics, not the cooling fan drive.

공급 형태: 중국 제조 HTD 브랜드 신품 대체품입니다. 최소 주문 수량 1개, 목재 케이스 포장, 발송까지 5~8 영업일이 소요됩니다.

설명

The 17-prefixed numbers in Volvo’s hauler catalogue sit apart from the older 11 and 15 series blocks, and buyers often assume that means a newer part that replaces the earlier one. It does not, on its own, mean anything of the kind.

적용성 및 근거

Volvo A25G, A30G, A35G, A40G and A45G articulated haulers, described in dealer parts data as a main hydraulic pump. Volvo’s own online catalogue does not return a citable page for 17487751, so the machine list is dealer-established rather than manufacturer-confirmed. No displacement, pressure or flow figure is published for it here.

What a number block does and does not tell you

Volvo allocates part numbers in ranges, and a 17-prefixed number usually belongs to a later design generation than an 11 or 15 prefixed one. That is a statement about when the number was issued, not about which part replaces which. Two numbers in different blocks can serve different machines, and two numbers in the same block can serve the same machine under different build specifications. The one that matters for ordering is the item your machine left the factory with, which is settled by the cast number and the serial prefix.

The closely related G-series listing 17487754 covers an almost identical machine range, and we publish both as separate catalogue items because no Volvo document shows one superseding the other. See 17487754 for the comparison.

Diagnosis and fitting

  • Judge a hauler pump by hot cycle time, not by a cold start-up check.
  • Rule out relief settings and the body holding valve before condemning the pump.
  • Noise under load means cavitation: check suction line, strainer and oil level.
  • On fitting, match shaft spline, pilot, flange, port positions and control orientation against the removed pump, prime with clean oil before cranking, change the return filter element, keep the case drain unrestricted to tank, and target ISO 4406 18/16/13.

당사의 pump buyer and specification guide covers the comparison method and the seal kit rebuild checklist covers rebuild scope.

주문

Minimum order one piece. Three to six month warranty on new aftermarket units as stated on your proforma invoice; photographed against your order before the wooden case closes, delivery 5 to 8 working days from payment subject to stock. This section covers hauler hydraulic pumps.

부품을 찾을 수 없나요? 오늘 배송이 필요하신가요? 지금 문의하세요.

아래에 모델 또는 일련 번호를 입력하면 당일 발송이 가능한 견적을 받을 수 있습니다.